How To Fix A Vacuum Cleaner With No Suction?

If you’re like most people, you rely on your vacuum cleaner to keep your floors clean. But what do you do when your vacuum cleaner loses its suction? 

In this blog post, we’ll show you how to fix a vacuum cleaner with no suction. We’ll also give you some tips for preventing this problem from happening. Keep reading to learn more!

How To Fix A Vacuum Cleaner With No Suction

If your vacuum cleaner has lost its suction, there are a few things you can do to try to fix the problem. First, check the vacuum filter and make sure it is clean. If it is clogged, then remove the filter and wash it with soap and water. Once it is dry, reattach the filter and see if that helps the vacuum’s suction.

If the filter is clean or you have replaced it and the vacuum still isn’t working properly, then the next thing to check is the hose. If there is a blockage in the hose, then that could be causing your vacuum to lose suction. 

To clear a blocked hose, first, remove it from the vacuum. Then, use a straightened coat hanger or similar object to reach into the hose and remove any debris that may be blocking it. Once the hose is clear, reattach it to the vacuum and see if that solves the problem.

Step By Step Guide How To Fix

Here is a detailed overview of these steps:

1. Check The Vacuum Cleaner’s Filters And Clean Them If Necessary

The first step is to take a look at your vacuum filters. Over time, these can become clogged with dirt and dust, which can reduce the vacuum’s suction power. To clean the filter, remove it from the vacuum and wash it with soap and water. Once it is dry, reattach it and see if that helps the vacuum’s suction.

If you don’t have time to clean the filter, you can also try replacing it with a new one. This is especially helpful if your vacuum filter is very old and/or significantly damaged.

2. Clear Any Blockages In The Hose

If there is a blockage in the hose, then that could be causing your vacuum to lose suction. To clear a blocked hose, first, remove it from the vacuum. 

Then, use a straightened coat hanger or similar object to reach into the hose and remove any debris that may be blocking it. Once the hose is clear, reattach it to the vacuum and see if that solves the problem.

3. Make Sure The Vacuum Cleaner Is Unplugged And Check The Cord For Damage

If you’ve checked the filters and hose and there doesn’t seem to be any problem there, the next thing to do is check the cord. 

Make sure that the vacuum cleaner is unplugged before doing this. Then, examine the cord for any damage such as fraying or exposed wires. If you find any damage, then you will need to replace the cord.

4. Remove The Dustbin And Empty It

If your vacuum has a dustbin, make sure to empty it before continuing. A full dustbin can cause the vacuum to lose suction power. 

To empty the dustbin, remove it from the vacuum and empty the contents into the trash. Then, put the dustbin back in place and see if that helps the vacuum’s suction.

how to fix a vacuum cleaner with no suction

5. Clean Out The Roller Brush And Make Sure It’s Free Of Debris

The roller brush is responsible for agitating the carpet and helping to loosen dirt and debris. If it is clogged or otherwise not working properly, then that could be causing your vacuum to lose suction. 

To clean the roller brush, remove it from the vacuum and use a brush or similar object to remove any debris that may be stuck in it. Once it is clean, reattach it and see if that helps the vacuum’s suction.

6. Replace All Parts That Were Removed And Try Using The Vacuum Cleaner Again

Once you have finished cleaning or otherwise troubleshooting the vacuum, replace all of the parts that you removed. Then, plug in the vacuum and try using it again. If it is still not working properly, then you may need to take it to a professional for repair.

7. Looking After Your Cordless Vacuum Batteries

Cordless vacuums are very convenient, but the batteries can be a weak spot. To get the most out of your cordless vacuum, it’s important to take good care of the batteries.

Here are some tips for how to do that:

  • Only use the charger that came with the vacuum. Using a different charger could damage the battery.
  • Don’t leave the battery charging for more than 24 hours at a time.
  • Avoid extreme temperatures, both cold and hot.
  • Every few months, clean the battery terminals with a cloth dampened with vinegar or lemon juice. This will help prevent corrosion.

Following these tips will help you prolong the life of your vacuum’s battery and ensure that it continues to work properly.

8. Take The Vacuum Cleaner To A Professional For Repair

If none of these solutions works, then you may need to take your vacuum cleaner to a professional for repair.

This is especially true if the vacuum is very old or if it has been damaged in some way. A professional will be able to diagnose the problem and determine the best course of action for fixing it.

Tips for preventing vacuum cleaner issues:

  • Regularly clean or replace the filter
  • Empty the dustbin frequently
  • Clean the roller brush regularly
  • Avoid vacuuming up large pieces of debris
  • Don’t try to vacuum over cords or other obstacles
  • Keep the vacuum cleaner in good
how to fix a vacuum cleaner with no suction
Conclusion

A loss of suction power can be a frustrating problem for any vacuum cleaner owner. However, there are a few things that you can try to fix the problem yourself. If none of those solutions works, then you may need to take your vacuum cleaner to a professional for repair. 

You can also help prevent this issue by regularly cleaning or replacing the filter, emptying the dustbin, and cleaning the roller brush. 

Additionally, avoid vacuuming up large pieces of debris and try not to vacuum over cords or other obstacles. Finally, keep the vacuum cleaner in good condition to help it last longer.

About Sakibul Islam

Sakibul is a product reviews analyst at the Smart Housekeeping, where he research, compare, review and writes about home appliances, cleaning products and cleaning tips. Prior to joining SH in 2023, he graduated from National University with a Master's degree in business management and accounting.

Leave a comment