How To Make A Towel Mop – Every Detail You Need Know

A daily regimen includes cleaning and mopping. Being sick and looking bad are both possibilities if the house is not clean. Now, it’s simple to make mopping accessories at home. The process of creating a towel mop is simple.

Additionally, it will assist you in recycling any extra towels. This article is sure, going to help you with how to make a towel mop. A few simple procedures are needed to make a towel mop.

Additionally, it makes a case for some tact and agility. Since constructing a towel mop at home is simple, I’ll go into further detail here on some important advice for doing it right so you can easily comprehend every step.

Towel Mop Making – Step By Step

how to make a towel mop

Most store-bought mops only push the dirt and grime on your floor around as they wear out. When properly maintained, this homemade mop can be rinsed and lasts for many years. Most household things were used to make this mop.

You may make a handmade mop that performs superior to the majority of store-bought brands with a little bit of time.

Step 1: Materials Needed

Gather your materials before beginning the task. Although they are typically present at home, you might need to get the cable wire at the nearest store. The following items need also be gathered in how to make a mop.

  1. Scissors
  2. A few Velcro tape bits
  3. A worn-out towel
  4. Standing mop
  5. Wire cable
  6. Nitrile ropes
  7. Normal cassettes
  8. An ink pen
  9. Weighing scale

Step 2:  Cut The Towel In Half

Take a towel with you. It should then be folded to create a second layer. You can divide the towel into equal pieces by doing this. Alternately, measure the towel accurately and use a marker pen to divide it into two sections.

Each section needs to be equally and clearly designated. Now, cut it off, making sure the pieces are all the same size. Put them aside once you’ve sliced them precisely. You’re now prepared to move to the next step making a towel mop.

Step 3: Add An Extra Layer With Another Cloth

After cutting the towel, add another layer of cloth inside the towel to strengthen the inner portion and make the mop absorb water quickly.

If you don’t have any light or fabric which is extra thin, the inner layer can be made with extra cloth pieces.

Step 4: Overlap

how to make a towel mop

Then, overlap each of the cutting pieces after setting those pieces aside. This will keep them all in a cross-like posture. Now hand stitch each individual side.

You can cut the pieces off to create a wide strip if you don’t want to stitch the sections together. Under the towel’s hem, broad strips are simpler to change and less problematic.

Make sure to cut four little grooves around the mop handle’s base. Keep in mind that the strips have to be tucked under the towel hems and edges. They ought to be laid out in parallel lines.

Step 5: Gather The Parts

Now gather each component separately. Use a rope to form a solid connection. Try to form a string out of the wide pieces before you tie them. Remember that this one is appropriate for individual towel strips.

Alternate techniques are available for separating the towel from its hem. To create a double section, stitch the edges together. Equally, distribute two or three Velcro tapes on the towel’s interior and exterior.

Step 6: The Towel Was Hooked Into The Mop Stand

Here’s a 6th step of how to make a towel mop guide. It’s time to attach the towel to the mop stand at this point. Use a cable wire to tie the towel strips together. Utilizing a mop stand, secure those strips.

If you’re using Velcro tape, fold the towel to properly secure the components.  after that fill the inside of the mop with a towel. With this homemade DIY gadget, you are now prepared to mop.

Step 7: Trim Or Round The More Jagged Edge

It could be challenging for you to utilize the mop stand because of how harsh the other side is. You can next use the remaining towel to encircle the time period of rough edges.

Just keep in mind not to add too much extra cloth to the mop handle so that it becomes uncomfortable to carry.

Step 8: Verify Whether It Functions

When the mop is prepared, test it out to check if it functions or not. If it functions flawlessly, examine the binding. You may ensure excellence by doing this.

The handmade mop will be a terrific and long-lasting cleaning solution for the complete home.

Step 9: Wipe The Floor

Finally, your mop should be ready to clean your home’s floors if there are no issues with it after use. Let’s sweep the floor now.

Read more: How to Use a Microfibre Mop for Dry Dust, Wet & Steam Cleaning

Suggestions For Creating a Towel Mop Like a Pro

After you’ve learned all about how to make a towel mop now is time to follow some recommendations to use it like a pro.

  • Make a small section of the towel. It will give you great pleasure to complete the task perfectly. If you do not fold a towel mop, it will not be properly secured. To make a good floor mop, the towel must be folded and cut.
  • Try to give the towel strokes a nice finishing touch. Cut them in half or divide them into 2-3 strokes. Then sew them together properly to form a rectangular shape.
  • You can measure and trace the old mopping pad with a marker. Parts should be cut from the hem and folded. Remember to cut according to your preference. If you need a large mop, bring a larger towel.
  • Assume you believe the bond between the mop and the handle will not be properly secured. Secure them tightly with a pin or clip. It will provide you with a quick backup by clinging to the mop handle.
  • To make a towel mop more appealing, varnish the mop handle. If you’re using a wooden mop handle, you’ll need to varnish it. Those handles are strong enough to form a strong bond. Regardless, you can use an old mop handle.
  • Making a mop towel with the proper flip is the main objective. You can’t mop the floor without it because it requires continuous forward and backward motion. Tie a tight knot around the towel mop’s handle. It will offer enough roughness so that you can flip the mop without difficulty.

Read more: Are Carpet Cleaners Good for Carpets?

Conclusion

A towel mop is easy to make and only requires a few materials. The best part about making your own towel mop is that you can customize it to fit your needs.

For example, you could use different colours of fabric or add extra padding for more absorbency. If you’re looking for an easy and thrifty cleaning solution, why not try making your own towel mop?

About Editor

Leave a comment